-2 twin beds upper, 2 full beds lower (no mattress included)
-Upper deck approx 185 inches wide total, 43 inches deep with guard rails mounted in front of this, 85 inches high total
UPPER DECK AND STAIRS
-All walls surrounding the upper deck shiplap in solid maple hard wood 5 to 5 1/2" boards with "nickel gap"
-Top upper back wall approx 15 inches above upper deck, upper deck at 69 inches off ground
-guard rails planned 7 inches above top of an 8 inch mattress. 3 1/2 inch gap on small lower rails.
- staircase to upper deck 18 inch wide stairs/10 inch deep stair treads/9 inch stair height.
- no stair rails planned at this time
-2x6 solid maple structural beams horizontal, front to back, upper and lower. 3"x"3 inch vertical posts. 2inch x 1 inch top cap around left/right and rear caps
- maple beds slats 13 slats on each twin bed. 3 1/3 inch wide with 2 1/2 inch gap
- a wood paneled system will be installed below the slats creating a finished ceiling to the lower beds looking up
LOWER DECK
- 2 full beds centered and symmetrical on the right and left side.
-6 inch solid maple beams on sides, back and front of bed
-footboard 18 inches high with a 3 inch decorative framing around using 3 x 3 inch vertical posts.
-sides of bed 2 inch framing with 2 inch reveal in center
-mattress not included, plan for 14 inch mattress
- solid maple bed slats, 2 sets per bed 13 slats per set.
-"night stand" shelves built into the lower system right and left of each bed.
- night stand matched to planned height of mattress
- all night stand shelves extend 7 inches toward the bed from the vertical posts. Outer shelves gain an inset of 1 inch on each side.
-center shelves extend and connect under the stairs.
- area around the center night stand is finished and boxed in, trimmed to match the bed and stairs for a finished appearance that matches the lower four stair side. Using flat panel wood.
-no lighting provided, we can work with the electricians, we can cut openings or plan for mounts for lighting to be added
-full beds mounted to the bunkhouse unit
- Everything sanded, primed, sanded and finish painted in white.
-Hardwood maple used almost entirely. Minor sections of the stair front, lower stair out panel and under stair encloser using Hardwood Maple Ply. We use a formaldehyde free product.